Minutes to Decimal Chart for Time Cards
This chart is for the crew lead adding up time cards and the owner doing payroll on Friday night. Paper time cards and most clocks show hours and minutes. Payroll and job costing need decimal hours. Once the hours are in decimals, the labor cost calculator turns them into what that time really cost the job.
Minutes to decimal chart (1 to 60)
Find the minutes on the left, read the decimal hours on the right. Values are rounded to two places.
| Minutes | Decimal hours | Minutes | Decimal hours |
|---|---|---|---|
| 1 | 0.02 | 31 | 0.52 |
| 2 | 0.03 | 32 | 0.53 |
| 3 | 0.05 | 33 | 0.55 |
| 4 | 0.07 | 34 | 0.57 |
| 5 | 0.08 | 35 | 0.58 |
| 6 | 0.10 | 36 | 0.60 |
| 7 | 0.12 | 37 | 0.62 |
| 8 | 0.13 | 38 | 0.63 |
| 9 | 0.15 | 39 | 0.65 |
| 10 | 0.17 | 40 | 0.67 |
| 11 | 0.18 | 41 | 0.68 |
| 12 | 0.20 | 42 | 0.70 |
| 13 | 0.22 | 43 | 0.72 |
| 14 | 0.23 | 44 | 0.73 |
| 15 | 0.25 | 45 | 0.75 |
| 16 | 0.27 | 46 | 0.77 |
| 17 | 0.28 | 47 | 0.78 |
| 18 | 0.30 | 48 | 0.80 |
| 19 | 0.32 | 49 | 0.82 |
| 20 | 0.33 | 50 | 0.83 |
| 21 | 0.35 | 51 | 0.85 |
| 22 | 0.37 | 52 | 0.87 |
| 23 | 0.38 | 53 | 0.88 |
| 24 | 0.40 | 54 | 0.90 |
| 25 | 0.42 | 55 | 0.92 |
| 26 | 0.43 | 56 | 0.93 |
| 27 | 0.45 | 57 | 0.95 |
| 28 | 0.47 | 58 | 0.97 |
| 29 | 0.48 | 59 | 0.98 |
| 30 | 0.50 | 60 | 1.00 |
Tenths of an hour chart
Some people log time in tenths of an hour instead of minutes. This is a lookup table only, one common way to group the minutes. It says nothing about how your time must be rounded for pay.
| Tenths | Minutes |
|---|---|
| 0.1 | 1 to 6 |
| 0.2 | 7 to 12 |
| 0.3 | 13 to 18 |
| 0.4 | 19 to 24 |
| 0.5 | 25 to 30 |
| 0.6 | 31 to 36 |
| 0.7 | 37 to 42 |
| 0.8 | 43 to 48 |
| 0.9 | 49 to 54 |
| 1.0 | 55 to 60 |
How to convert minutes to decimal hours
Divide the minutes by 60 and add the result to the whole hours. Three examples:
- 8 hours 20 minutes: 20 divided by 60 is 0.33, so 8.33 hours.
- 6 hours 50 minutes: 50 divided by 60 is 0.83, so 6.83 hours.
- 4 hours 6 minutes: 6 divided by 60 is 0.10, so 4.10 hours.
To go the other way, multiply the decimal part by 60. A payroll report that shows 6.30 hours is 6 hours and 18 minutes, because 0.30 times 60 is 18. A report that shows 7.40 hours is 7 hours and 24 minutes, not 7 hours and 40 minutes. When a crew member asks why their check looks short, this is often the answer: the hours were right, and the person reading them read the decimal as minutes.
The 7.45 mistake
Clock time counts in 60ths. Decimal hours count in 100ths. So 7 hours 45 minutes is 7.75, not 7.45. Typing the minutes straight after the dot is the most common time card error I see, and it always shorts the hours.
Round once, at the end
Add up all the minutes first, then convert. If you round each day and then add the days, the small rounding bits pile up. The example below shows it.
Worked example: one week on one job
One worker, three days on the same job. These are example numbers.
| Day | Clock time | Minutes | Decimal hours |
|---|---|---|---|
| Monday | 8 h 20 m | 500 | 8.33 |
| Tuesday | 7 h 45 m | 465 | 7.75 |
| Wednesday | 6 h 50 m | 410 | 6.83 |
| Total | 22 h 55 m | 1,375 | 22.92 |
Adding the rounded days instead gives 8.33 + 7.75 + 6.83 = 22.91, one hundredth short. That is small on one card and real money across a crew and a year. The bigger slip is the 7.45 kind: typing 22.55 for 22 hours 55 minutes drops 0.37 hours.
From decimal hours to labor cost
Hours times the wage is not what the time cost you. Hours times the loaded rate is. In the labor cost calculator, with example inputs of a $30 wage, 10% taxes, 8% comp, $5 overhead per hour and 15% non-billable time, the burdened cost is $40.40 and the true cost per billable hour is $47.53.
| Hours entered | Labor cost on screen |
|---|---|
| 22.92 (correct) | $1,089.37 |
| 22.55 (the 7.45 kind of slip) | $1,071.79 |
Put those hours and your loaded rate on the labor line of the job cost calculator to see the job's total cost and margin. With the rate rounded to $47.53 first, it shows $1,089.39; the 2 cents come from rounding the rate. For the full loaded-rate math, see how to calculate labor cost, and for why hours belong on the job at all, read what job costing is.
Check the hours before you check the money. If the week's decimal total is less than the clock total in whole hours, something was typed wrong. 22 hours 55 minutes can never be 22.55 hours, because 55 minutes is close to a full hour. A quick look at the chart above, before the hours go to payroll or to the job, catches most of these slips while they are still cheap to fix.
Lunch, breaks and overtime on a time card
Take unpaid lunch out before you convert. A day from 7:00 to 3:30 with a 30-minute unpaid lunch is 8 hours, not 8.5. Then convert, and only then check the weekly total against 40 hours. The Department of Labor says covered workers "must receive overtime pay for hours worked over 40 in a workweek at a rate not less than time and one-half" unless an exemption applies (read November 13, 2026). State rules can add to that, so check yours or ask your payroll pro.
A construction time clock that records exact minutes takes most of the hand math away, and clocking in at the jobsite keeps the hours tied to the right job. If some of your workers are subs, not employees, their time works differently; see paying 1099 subcontractors.
Where the app fits (honest limits)
I built Job Cost Pro so the crew clocks in on the job with one tap, and those hours land on the job at its labor cost next to the receipts, with the margin shown from costs recorded so far. It records crew pay; it does not move money. It is not a scheduling tool. Free on the App Store: 3 jobs, 50 receipts a month, AI scanning included, no card. Get it here.
Keep this page open on Friday, or try the other free contractor tools that run in your browser with no signup.
Track your next job with Job Cost Pro
Scan receipts, confirm the suggested job, and see your recorded costs against your budget. Start with the free plan in your browser or get the iPhone app.
Google Play: US only.
Free plan available. Some features require a paid plan.
FAQ
How do you convert minutes to decimal for a time card?
Divide the minutes by 60 and add the result to the whole hours. 8 hours 20 minutes is 8 plus 20 divided by 60, which is 8.33 hours. Add up all the minutes for the week first and convert once at the end, so the rounding does not pile up.
What is 45 minutes in decimal hours?
45 minutes is 0.75 hours, because 45 divided by 60 is 0.75. So 7 hours 45 minutes is 7.75 hours on a time card or a job cost sheet, not 7.45.
Is 7 hours 30 minutes 7.3 or 7.5?
It is 7.5 hours. 30 minutes is half an hour, and 30 divided by 60 is 0.5. Writing 7.3 treats the minutes as hundredths and shorts the time card by 0.2 hours.
How many decimal places should payroll hours have?
Two decimal places, like 7.75, is common and is what the chart on this page uses. Whatever you pick, convert the total minutes once at the end, and check what your payroll service expects before you send the hours.
What is a tenth of an hour in minutes?
A tenth of an hour is 6 minutes, because 60 divided by 10 is 6. The tenths table on this page shows one common way to group the minutes into tenths; it is a lookup only and says nothing about how pay must be rounded.