How to Price Handyman Jobs (Hourly vs Flat)
Rate tables tell you what somebody else charges in somebody else's town. They do not tell you what you need to charge to keep the lights on. Small jobs make that worse: a faucet swap pays for one hour, but the drive, the parking and the second trip for the right fitting all cost you too. Run your own numbers in the free labor cost calculator, which adds tax, overhead and unbilled time to your pay. Then pick how to bill, which is what this post is about. Bigger jobs in one trade work the same way: here is how to price a painting job and how to price landscaping jobs, each worked from cost to price.
Find your true cost per billable hour
The rate math has its own post: how to set your hourly rate walks through it step by step. Here is the short version for a one-person shop, with example inputs:
| Input | Example | What the calculator shows |
|---|---|---|
| Your pay per hour | $35 | |
| Taxes | 15.3% | |
| Overhead per labor hour | $12 | Burdened cost/hr: $52.36 |
| Non-billable time | 30% | True cost per billable hr: $74.79 |
| Job labor hours | 4 | This job labor: $299.17 |
That 15.3% is the self-employment tax rate (12.4% Social Security and 2.9% Medicare, per the IRS self-employment tax page, read November 13, 2026). Putting it in the taxes box is a simple stand-in, not your real tax bill. This is not tax advice: ask your tax pro. The 30% non-billable share is high on purpose. Small jobs mean more driving between them. If you want to see what goes into the $12 overhead, read what overhead really includes.
Add profit to get your hourly rate
Cost is not the rate. Add profit on top: $74.79 x 1.25 = $93.49, which I would round to $95 an hour. The 25% is an example choice, not a standard. The longer post on how to calculate labor cost shows why the loaded cost is so far above the pay.
If $95 feels high next to what you have been charging, look at the cost line again before you cut it. Every dollar under $74.79 is a dollar you pay to work. A lower rate only makes sense if one of the inputs is lower for you: less overhead, fewer unbilled hours, or a smaller tax set-aside your tax pro agrees with. Change the input, not the answer.
Mark up materials
Pick one stated percentage for materials and keep a receipt for every line. In the example, $140 of parts at a 20% markup is $168. The markup calculator shows the price, the profit and the margin for any markup: here, $28 profit and a 16.7% margin. If the two words blur, read markup vs margin.
Price one job three ways
The job: swap a kitchen faucet, patch two drywall holes, recaulk a tub. You expect 4 hours. The 0.5-hour buffer on the flat quote is an example choice.
| Way to bill | How it is built | Price |
|---|---|---|
| Hourly | 4 hrs x $95 + $168 materials | $548 |
| Flat rate | 4.5 hrs x $95 + $168 = $595.50, quoted at | $595 |
| Minimum charge | 2 hrs x $95 (any visit) | $190 |
Planned profit on the flat quote is $155.83, a 26.2% margin (a 35.5% markup). Planned profit billed hourly is $108.83, a 19.9% margin. On paper, flat looks better. Keep reading.
When hourly wins and when flat rate wins
A flat rate puts the overrun risk on you. If the job takes longer, you eat the hours. Hourly puts that risk on the client, which is fair when nobody can see behind the wall yet. The same split shows up on big jobs too; the fixed price vs cost-plus post covers it.
| Bill hourly when | Quote a flat rate when |
|---|---|
| The scope is unclear (leaks, old wiring, rot) | You have done this exact job many times |
| The client keeps adding small items | The client wants one number up front |
| Parts may need a second supply run | Parts are known and in the truck |
Before you quote a flat rate, check five things:
- You have seen the job, or clear photos of it.
- You know the parts and where to get them.
- You added a time buffer and wrote it down.
- The quote says what is not included.
- The quote is above your minimum charge.
Set a minimum charge
Drive time, setup and cleanup happen even for 20 minutes of work. A minimum charge covers them. In the example, 2 hours at $95 is a $190 minimum, so a 20-minute visit pays for the trip it took to get there. Say the minimum on the phone, before you drive out, so it is never a surprise on the bill.
A minimum also helps you fill the day. When a client has one small item, ask what else is on the list. Three small fixes on one visit beat three separate trips, for you and for them. Some clients will save up a list once they know the minimum, which turns a 20-minute call into a full half day.
Count drive time
Drive time is the biggest hidden cost in small jobs. It is already inside the 30% non-billable share above, so do not bill it twice. Some handymen add a trip charge instead; either way, decide once and stay with it. Keep a record of the miles too, for your own numbers and for tax time. The free mileage log template has a line for each trip. Ask your tax pro how you should claim them.
Check planned vs made after every job
Here is how the example job really went: 5.5 hours instead of 4, and $162 of parts after a second supply run. Real cost: 5.5 hours at $74.79 is $411.36, plus $162 materials, for $573.36.
| Way it was billed | Price | Real cost | Made | Margin |
|---|---|---|---|---|
| Flat rate, quoted $595 | $595.00 | $573.36 | $21.64 | 3.6% |
| Hourly, 5.5 hrs x $95 + $194.40 materials | $716.90 | $573.36 | $143.54 | 20.0% |
The flat quote planned $155.83 and made $21.64. Nothing went badly wrong: one more trip and a stubborn caulk line. That is why you check every job, not just the bad ones. It is the only way to see if your flat prices hold. The track job profitability post shows how to do it without a spreadsheet you never open.
Where the app fits (honest limits)
That planned-versus-made check is what I built Job Cost Pro for: log the receipts and the hours on the job, and the margin shows from costs recorded so far. If invoicing is your main need, the handyman invoice app page explains what it does there. It is not a scheduling tool. Free on the App Store: 3 jobs, 50 receipts a month, AI scanning included, no card. Get it here.
Pick one recent job, put the real hours and receipts next to what you charged, and see what it made. That one number will tell you more than any rate table.
Track your next job with Job Cost Pro
Scan receipts, confirm the suggested job, and see your recorded costs against your budget. Start with the free plan in your browser or get the iPhone app.
Google Play: US only.
Free plan available. Some features require a paid plan.
FAQ
How do I figure out what to charge as a handyman?
Start with your true cost per billable hour: your pay plus taxes and overhead, divided by the share of hours you actually bill. Add profit on top to get your hourly rate. Then decide per job whether to bill that rate by the hour, quote a flat price, or charge your minimum.
Should a handyman charge by the hour or by the job?
Bill by the hour when the scope is unclear, like leaks or old wiring, because the client carries the risk of extra hours. Quote a flat price when you know the job well and the client wants one number. A flat price puts the overrun risk on you, so add a time buffer.
What is a fair minimum charge for a handyman visit?
There is no standard number. Base it on your own rate: enough hours to cover the drive, setup and cleanup that every visit takes. In the example in this post, 2 hours at $95 sets a $190 minimum. Tell the client the minimum before you drive out.
How much should a handyman mark up materials?
Pick one stated percentage and keep a receipt for every line. The example in this post uses 20%, which turns $140 of parts into $168. That 20% is an example choice, not a standard, and a 20% markup is a 16.7% margin, not 20%.
Do handymen charge for drive time?
Drive time is a real cost either way. You can build it into your rate as non-billable time, or add a separate trip charge. Do one or the other, not both, or you bill the same drive twice. A minimum charge also covers the drive on very short visits.