How to Start a Construction Business
Most guides on starting a construction company stop at the paperwork. The paperwork matters, and it is short here, with links to the official pages. This post spends its time on the part that decides whether the company lasts: what you charge, what it costs to keep the doors open, and how you find out if a job made money. If you want to try your own numbers as you read, the free overhead and profit calculator finds your overhead rate from two yearly numbers and prices a job from its cost.
The steps, in order
- Pick your trade and your area
What work you do, for whom, and how far you will drive for it.
- Choose a business structure and register it
Sole proprietor, LLC or corporation. Then register with your state.
- Get your tax ID numbers
A federal EIN, and any state tax numbers your state asks for.
- Get licenses, permits and insurance
What you need depends on your trade, your state, your county and your city.
- Open a business bank account
Keep company money apart from your own from day one.
- Set your rate and your overhead number
Before you price a single job.
- Budget and job cost your first job
A budget by bucket, and every cost recorded against the job.
The first five steps follow the U.S. Small Business Administration's launch your business guide (read November 13, 2026), which walks through location, structure, name, registration, tax IDs, licenses and permits, a bank account and insurance. The federal tax ID comes from the IRS employer identification number page. The last two steps are the money side, and they are the rest of this post.
Licenses, insurance and your business structure (the short version)
Construction rules are mostly state and local. The SBA guide says "States tend to regulate a broader range of activities than the federal government," and it lists construction among the activities "commonly regulated at the local level." On insurance, the same guide says "Laws requiring insurance vary by state." So the right list for you depends on your trade and where you work: check your state licensing office and your city or county permit office before you take a job.
Your structure matters too. The SBA puts it plainly: your business structure affects how much you pay in taxes, your ability to raise money, the paperwork you need to file, and your personal liability.
How much it costs to start a construction business
There is no honest single number. A painter with a van and a remodeler with a crew and a trailer start in very different places. What you can do is list your costs the way the SBA's plan your business guide does (read November 13, 2026): split them into one-time costs and monthly costs. The guide notes that "paying for permits, licenses, and fees are generally considered to be one-time expenses."
| Cost | One-time or monthly | What decides the amount |
|---|---|---|
| Business registration and permits | One-time (some renew) | Your state, county and city |
| Trade license and exams | One-time (renews) | Your trade and your state |
| Tools and equipment | One-time | Your trade, and what you already own |
| Truck or van | One-time or monthly | Cash, loan or lease |
| Insurance | Monthly or yearly | Your trade, your state, your crew size |
| Phone, software, bookkeeping | Monthly | The tools you pick |
| Fuel and truck upkeep | Monthly | Miles you drive |
Add up the one-time column to see what you need before the first job. The monthly column is the start of your overhead, which is the next step.
Set your rate from your true cost per hour
A new company's most common pricing mistake is charging a wage instead of a rate. A wage is what one hour costs before taxes, insurance, drive time and the office. The IRS sets the employer share of Social Security and Medicare at 7.65% together (IRS Topic 751, read November 13, 2026), and that is only one of the costs on top of the wage. The labor cost calculator turns a wage into a true cost per billable hour. Then price the hour with this formula:
That example comes from a $26 wage, worked step by step in how to set your hourly rate as a contractor. The same formula prices a whole job, as you will see below.
Know your overhead before you bid
Overhead is everything that keeps the company running but does not belong to one job: the truck, insurance, your phone and software, tools, the office. A new company does not have last year's numbers, so budget the first year instead. Here is an example for a one-truck shop.
Now divide by the revenue you plan to bill in the year. If you plan $240,000 of work, the example overhead is $36,000 / $240,000 = 15% of every dollar you bill. That 15% is the overhead number in the price formula. The construction overhead post lists what counts, and what a good profit margin is covers the profit part.
Budget your first job before you start it
Take your first job apart into buckets: labor, materials, subs, and permits and fees. Say the example job comes to $4,000 of labor, $3,200 of materials, $1,000 of subs and $300 of permit, fees and dump: $8,500 of cost. With the 15% overhead and a 10% profit on cost, the price is $8,500 x 1.10 / 0.85 = $11,000.
Notice the margin. The job shows $2,500 over its cost, a 22.7% margin on the price. Only $850 of that, 7.7%, is profit: the rest pays the truck and the insurance. New owners who see 22.7% and cut the price to win the job cut straight into the overhead money. The free job cost calculator runs the same math from hours, materials, subs and a markup.
Job cost from job one
A budget is a guess until the job is done. Job costing is how you check it while there is still time to act: record every hour and every purchase against the job when it happens, then compare each bucket with its budget. Here is the example job at about the halfway point.
Labor is the bucket to look at this week: $2,900 of $4,000 is used with half the job left. Maybe the job is harder than you bid, or maybe a change came up that should be a paid change order. Either way, you found it in week one, not after the final payment. The what is job costing guide starts from zero, and the $42,000 bathroom example shows what a missed margin looks like on one real job. Keep the company books clean from the start too: contractor bookkeeping covers the basics.
Starting a remodeling company
Remodeling has its own money traps. Old houses hide things, so changes come up on almost every job. Price them as written change orders before the work, not as favors after it; the change order tracking post shows how. Larger jobs are often paid in stages, so plan a draw schedule that keeps the money ahead of your costs; see the construction draw schedule post. And because one remodel mixes labor, materials and several trades, the bucket budget above matters even more. The remodeling job costing post goes deeper on that.
Where the app fits (honest limits)
None of the paperwork above is something an app does for you. Where Job Cost Pro fits is the last step: it records receipts and crew hours against each job and shows the margin from the costs recorded so far, so a first job running over shows up while you can still act. It is not a scheduling tool, and it is not accounting software. Free on the App Store: 3 jobs, 50 receipts a month, no card. Get it here.
Start with your overhead number: a year of planned costs divided by a year of planned revenue. Every price you give after that has a floor you can trust.
Track your next job with Job Cost Pro
Scan receipts, confirm the suggested job, and see your recorded costs against your budget. Start with the free plan in your browser or get the iPhone app.
Google Play: US only.
Free plan available. Some features require a paid plan.
FAQ
How much does it cost to start a construction business?
There is no single number. It depends on your trade, your state and city, and the tools and truck you already own. List your costs in two groups the way the SBA suggests: one-time costs such as registration, permits, licenses, tools and equipment, and monthly costs such as insurance, fuel, phone and software.
Do I need a license to start a construction business?
It depends on your trade, your state and your city. The SBA lists construction among the activities commonly regulated at the local level. Check your state licensing office and your city or county permit office, and ask your attorney before you take a job.
What insurance does a new construction company need?
The SBA says laws requiring insurance vary by state, so start with what your state requires, especially once you have employees. Then talk to an insurance agent about the coverage your kind of work needs. This is not insurance or legal advice.
Should I start my construction business as an LLC?
It depends on your situation. The SBA notes that your business structure affects your taxes, your ability to raise money, your paperwork and your personal liability. Ask your attorney or CPA which structure fits before you register.
How do I price my first construction job?
Budget the job by bucket (labor, materials, subs, permits and fees), add up the cost, then use price = cost x (1 + profit %) / (1 - overhead %). In the example in this post, $8,500 of cost with 10% profit and 15% overhead comes to an $11,000 price.
How much overhead should a new construction company plan for?
Build it from your own first-year budget instead of a rule of thumb: truck, insurance, fuel, tools, office, phone and software. Divide the total by the revenue you plan to bill. In the example in this post, $36,000 of overhead on $240,000 of planned work is 15%.