Average Markup on Labor and Materials
Every contractor I know has asked some version of this: what do other guys mark up? I asked it too, back when I priced my first remodels off a number a supplier mentioned at the counter. The honest answer is that most of the numbers you see online have no survey behind them. Before you read further, put your own cost and price into the markup calculator so you can see the markup and the margin side by side. Then compare it to the one number below that does have a source. For a bid worked line by line, see how to price a bathroom remodel.
Why there is no one average markup
Search for an average contractor markup and you get ranges: 10 to 20 percent on one page, 15 to 35 percent on the next. None of the pages I read on November 13, 2026 said where the range came from. I looked for a free survey from a trade group that splits markup into labor and materials. The National Association of Home Builders says that kind of detail sits in its paid Remodelers' Cost of Doing Business Study. I did not buy it, so I will not quote a labor-only or materials-only number here. For a markup worked on one trade job, see how to price a painting job.
There is a second reason the ranges do not help. Markup depends on what your overhead costs and how you count labor. A one-truck shop and a ten-person crew can both be right at very different numbers.
The one sourced number, turned into markup
NAHB's April 8, 2026 report on remodelers says this about 2024, word for word: "which translates into an average gross profit margin of 29.9%", and "about $1.9 million (70.1%) was spent on cost of sales." Net profit after overhead was 6.3%. So overhead took about 23.6% of revenue (29.9% minus 6.3%).
That is a margin, not a markup. Margin is profit divided by the price. Markup is profit divided by the cost. To flip one into the other: markup = margin divided by (1 minus margin). So 0.299 divided by 0.701 is 0.4265, about a 42.7% markup on cost. If the two words still blur together, read markup vs. margin, or let the markup to margin calculator flip it both ways.
| NAHB remodelers, 2024 | Share of revenue | As markup on cost |
|---|---|---|
| Cost of sales | 70.1% | - |
| Gross profit margin | 29.9% | about 42.7% |
| Net profit margin (after overhead) | 6.3% | - |
Look at the gap between 29.9% and 6.3%. Most of the gross profit went to overhead: office, trucks, insurance, the owner's time. That is why a markup that looks fat on one job is often thin for the year. For what a healthy margin looks like across a whole company, see what a good profit margin is for a construction company.
Labor vs. materials: why many contractors use two numbers
Labor and materials carry different risk. Hours run over. A wall opens up and the job takes two more days. Materials are the opposite: the client can look up the price of a toilet on their phone at the kitchen table. So a lot of contractors put a higher markup on labor and a lower one on materials. That is a choice, not a rule, and nothing I found puts a sourced average on either side.
One thing matters more than the percentage: mark up labor from the loaded rate, not the wage. A $25 wage costs you far more once payroll taxes, workers' comp and the hours you cannot bill are in it. Here is how to calculate labor cost line by line, and how to set your hourly rate from that cost.
A job worked line by line
Here is one job with a different markup on each line. These are example numbers, not data from a real job and not a typical job. Labor is 80 hours at a $50 loaded rate.
| Line | Cost | Markup | Price |
|---|---|---|---|
| Labor (80 hrs at $50) | $4,000 | 25% | $5,000 |
| Materials | $3,000 | 15% | $3,450 |
| Subs | $2,000 | 10% | $2,200 |
| Dumpster and permit | $500 | 0% | $500 |
| Total | $9,500 | 17.4% blended | $11,150 |
Each markup on its own sounds normal. Together they blend to a 17.4% markup and a 14.8% gross margin. That is about half of the NAHB 29.9%, before a dollar of overhead is paid.
What the blended markup really gives you
Price the same $9,500 of cost two other ways and the gap is easy to see:
| Way to price it | Price | Profit | Margin |
|---|---|---|---|
| Four line markups (above) | $11,150 | $1,650 | 14.8% |
| Flat 25% on everything | $11,875 | $2,375 | 20.0% |
| NAHB level (42.7% markup) | $13,552.07 | $4,052.07 | 29.9% |
You can check the middle row in the job cost calculator: 80 hours at $50, $3,000 materials, $2,000 subs, $500 other, 25% markup gives a $9,500 cost and an $11,875 price. That tool takes one markup for the whole job, so the line-by-line math lives in the table above, and the tool checks the total.
Materials: when to mark up less, or not at all
Some jobs change the materials question. When the client buys the tile and you install it, there is nothing to mark up, so the labor has to carry the job. On a cost-plus or time-and-materials job, the materials markup is written into the contract, and the client sees the receipts. The fixed-price vs cost-plus post walks through which contract fits which job.
Whatever you pick, pick it before the bid and write it down. The worst markup is the one you decide after the job is already sold.
Set your own markup from your books
A markup that works starts from your own overhead, not from somebody else's range. Before your next bid, check four things:
- Your overhead as a share of revenue for last year (rent, trucks, insurance, phone, your office time).
- Your loaded labor rate, not the wage.
- Your rule for materials: the same markup as labor, a lower one, or none on client-supplied items.
- The blended margin on the whole bid, not the markup on each line.
If you have never worked out the first one, start with construction overhead. All of the free contractor tools run in your browser with no signup.
Knowing the markup on paper is half of it. The other half is seeing what the job actually made. That is why I built Job Cost Pro: you log receipts and crew hours to the job, and the margin shows from costs recorded so far, so you see a thin job while you can still do something about it. It is not a scheduling tool. Free on the App Store: 3 jobs, 50 receipts a month, AI scanning included, no card. Get it here.
Run your last three jobs through the markup calculator with the real cost and the real price. If the margins come out under 29.9%, you know where to look first.
Track your next job with Job Cost Pro
Scan receipts, confirm the suggested job, and see your recorded costs against your budget. Start with the free plan in your browser or get the iPhone app.
Google Play: US only.
Free plan available. Some features require a paid plan.
FAQ
What is the average markup on labor for contractors?
I found no free, trade-wide average for labor markup alone. NAHB reports that remodelers averaged a 29.9% gross profit margin in 2024, which is about a 42.7% markup on total cost, but that number covers labor, materials and subs together. Build your labor markup from your loaded labor rate and your overhead.
How much do contractors mark up materials?
It varies by contractor and by contract. Many put a lower markup on materials than on labor because clients can check material prices easily, and some add none when the client supplies the materials. I found no sourced average for materials markup on its own.
Is 30% a normal contractor markup?
A 30% markup gives a 23.1% gross margin (0.30 divided by 1.30). That is below the 29.9% gross margin NAHB reported for remodelers in 2024. Whether it works for you depends on your overhead: if overhead eats 20% of revenue, a 23.1% gross margin leaves very little profit.
Should labor and materials have the same markup?
They do not have to. Labor carries the risk of hours running over, and materials are easy for a client to price-check, so many contractors mark up labor higher. What matters most is the blended margin on the whole job, because four normal-sounding markups can blend into a thin margin.
What markup do I need for a 30% margin?
Divide the margin by one minus the margin: 0.30 divided by 0.70 is 0.4286, so you need about a 42.9% markup on cost to make a 30% gross margin. The markup calculator on this site does the same math in both directions.